矩形水槽模具属于金属材质钣金加工成型模具，具有可拆解，组装的设计优势，这种方式为的就是能够保持异形结构的水槽构件制作简便性，拆解快速性的高效率支持，不论是从缝隙之中填料还是从底部装料都要将其完整的组装起来，因为每个连接的部位都是采取螺栓进行固定的，相应的螺栓孔径正好能够穿过相应螺栓，这样就能够起到尺寸上的定位作用，防止预制的过程中出现尺寸上的偏差现象，还能够预防振捣过程中出现漏浆的现象发生。 U形状设计的排水槽模具多数是采用单独模板模型进行制作的塑料模具，其中还有一把部分是根据施工方的使用要求来定制的排水槽钢模具，这种模具属于大型结构体系的模具品种，主要是应对异形水泥构件以及短时间预制提升生产效率来设计，矩形水槽模具本身就有很高的强度，并且板材厚度的正确选用是可以满足很多种不同型号混凝土的正常使用，

The rectangular tank mold belongs to the metal sheet metal processing and molding mold, which has the advantages of disassembling and assembling. This method is to maintain the simplicity of the Flumeponents of the special-shaped structure and the efficient support for the rapid dismantling. Both the filling from the gap and the filling from the bottom are fully assembled, bece each connection is bolted and the corresponding bolt aperture can pass through the corresponding bolt. In this way, it can play a role in dimensional positioning, prevent the urrence of dimensional deviations in the precast process, and also prevent the urrence of leakage of slurry in the vibration process. Most of the U-shaped drain mold is a plastic mold madeing a separate template model. There is also a steel mold for the drain groove that is partially tomized ording to the construction party'se requirements. This mold belongs to the mold type of a large structure system. It is mainly designed to deal with special-shaped cementponents and short-term prefabricated production efficiency. The rectangular tank mold itself has a high strength, and the correct selection of plate thickness can meet the normale of many different types of concrete.